Microcement · Walls
Microcement Walls in Scottsdale & Paradise Valley
Hand-troweled walls with the softness of plaster and a sealed, wipeable surface. No grout, no seams, no tile edges.
Walls that read as one plane
Two thin coats go on by hand over drywall, plaster, painted walls or existing tile. The trowel leaves a soft movement in the surface that shifts as the light moves across it, and a matte top coat seals it so it can be wiped down.
A single feature wall, a whole room, a kitchen backsplash, an arched hallway or the inside of a shower. In wet areas the top coat is the two-component one. Our own crew applies every coat, and on a wall that's what decides whether it reads as one plane or shows every lap mark.
- Over drywall, plaster, painted walls and existing tile
- Two coats of roughly a millimeter, troweled by hand
- Arches, curves and niches without a joint
- Matte, sealed top coat you can wipe clean
- Two-component top coat in showers and wet areas
- Eighteen standard tones, in fine texture for anything you touch
The same finish wraps stairs, islands and fireplaces too. See stairs, islands and fireplaces.
Walls run $14 to $22 per square foot installed. Full ranges are on the pricing page.
Book a Measure & Spec VisitStart with a free 20-minute discovery call
Measure & Spec is $500 for microcement or a single bath, credited toward your project.
Recent work
From our projects
Finish references
Walls without a joint
Basin walls, arched corridors and full rooms in one surface.
Finish references from our material library.
Questions we get
Before you call
Can it go over my existing walls?
Drywall, plaster, painted walls and tile all work once the surface is roughened and primed. Loose paint or drumming tile comes off first.
Can it go outside?
Yes. It's rated for interior and exterior use. We check the wall and specify the top coat at the Measure & Spec visit.
How do I clean it?
A soft cloth and a mild, pH-neutral cleaner. No abrasive pads. Care instructions come with handover.
What does it cost?
Walls run $14 to $22 per square foot installed. The minimum project is $3,500.
Book a Measure & Spec Visit
We measure, check the substrate, agree the finish and give you a fixed price.
Start with a free 20-minute discovery call
Measure & Spec is $500 for microcement or a single bath, credited toward your project. $1,500–$2,500 for MCM, windows or multi-trade work, credited.