Baths & wet rooms
Bathroom Remodels in Scottsdale & Paradise Valley
The best room in the house for microcement. Pan, walls and vanity in one continuous surface.
No grout in a wet room
Grout is the part of a bathroom that ages first. It stains, it cracks at the change of plane, and it is the thing people scrub. A microcement wet room removes it: the pan, the walls and often the vanity run as one surface with a two-component top coat over the top.
The cabinetry, glass and fixtures get specified against the finish rather than after it, so the reveals land where they were drawn.
- Microcement shower pans, walls, vanities and countertops
- Two-component top coat in all wet areas
- Frameless glass, floating vanities and stone basins
- Lead-free fixtures certified to cUPC and NSF/ANSI 61
See the Paradise Valley bathroom remodel at 6001 E Naumann Drive: a microcement bath, plus the primary bath before and after. More on grout-free microcement showers.
Book a Measure & Spec Visit Start with Design & Feasibility, from $7,500Start with a free 20-minute discovery call
Measure & Spec is $500 for microcement or a single bath, credited toward your project.
Recent work
From our projects
Vanities
Floating vanities, stone and wood
Wall-hung cabinetry in oak, walnut and lacquer, with sintered stone tops and integrated basins. Drawn to the wall they hang on, with the lighting and plumbing set out before the tile goes up.
Finish references from our vanity and stone library. Sintered stone tops to 12 mm, in matte, soft-light and full-body finishes.
Questions we get
Before you call
Can you microcement over my existing tiled shower?
Usually yes. The surface gets roughened and primed so the microcement keys to it, then goes on over the top. No demolition, no skip, and the bathroom is back a good deal sooner than a tear-out. We confirm it at the Measure & Spec visit, because a tile bed that is already drumming or lifting has to come off first.
How long is the bathroom out of use?
Several days of application with drying time between coats, then about a week of cure before heavy use. We give you the day count at the Measure & Spec visit.
Does it need sealing later?
The two-component top coat is the protective layer. Care instructions come with handover.
Book a Measure & Spec Visit
We measure, check the substrate, agree the finish and give you a fixed price.
Start with a free 20-minute discovery call
Measure & Spec is $500 for microcement or a single bath, credited toward your project. $1,500–$2,500 for MCM, windows or multi-trade work, credited.