Materials & finishes
Specified against test data, not showroom lighting. The certificates go in your closeout binder.
How we specify
Luxury finish selection usually happens by eye, in a showroom, under lighting chosen to sell. Ours happens against test data. A window is specified by its AAMA performance grade. Decking is specified by its fire class and slip rating. Cabinetry is specified by its emissions compliance.
AuSpaces holds integrated sourcing relationships enabling premium finishes at competitive pricing. What that means for you is a finish level normally reserved for ultra-luxury work, with the certification to prove what went in the house.
The specification
Nine categories, each specified against its own test standard. Ask for the data sheet on anything here and it comes with the quote.
Two-component microcement for walls, floors, showers, vanities and countertops, indoor and out. Built up in coats of roughly one millimeter, with a two-component top coat and hardener in wet areas.
Bendable large-format stone veneers in travertine, concrete, slate, charred wood, rammed earth and metal, plus sculptural relief panels for feature walls and facades.
Architectural aluminum windows and doors with polyurethane thermal breaks, Low-E argon glazing and multi-point locking. Slim sightlines, panoramic sliders to fifteen feet, lift-and-slide walls and pivot entries to 1,100 lb.
Frameless European cabinetry and closet systems in lacquer, high-gloss, matte and real-wood finishes, with soft-close hardware throughout.
Large-format sintered porcelain for countertops and vanities, in slabs up to 126 inches long, in matte, satin and full-body finishes.
Pre-finished real-wood veneer panels and PET decorative surfaces for cabinetry, feature walls and millwork.
Co-extruded wood-plastic composite for decks, railings, fences and exterior cladding. Waterproof, termite-proof and color-stable under desert sun.
Engineered hardwood and rigid-core SPC flooring with attached acoustic underlayment.
Lead-free stainless and solid-brass faucets, thermostatic shower systems and freestanding tubs.
We will walk it, scope it and show you the specification that fits.
Start with a free 20-minute discovery call
Measure & Spec is $500 for microcement or a single bath, credited toward your project. $1,500–$2,500 for MCM, windows or multi-trade work, credited.
